Blind use of chemical fertilizers and pesticides in crops adversely affects the health of the soil. Farmers use chemical drugs and fertilizers in the fields at the option of high yield, which is why essential nutrients are not in fertile soil. At the same time, this problem is rapidly increasing as fertilizers are used without checking the soil. In such a situation, farmers are advised to check the soil of their fields every 6 months and every 6 months. In such a situation, it is very important that farmers know how to collect the sample of soil testing. Also, some of these things should be taken care of.
Soil testing is necessary before farming
Will end in April. In such a situation, farmers can now test the soil before cultivating carp crops. In fact, it is very important to check the soil after harvesting the wheat crop. Because of this, the nutrients in the soil can be properly known. Without conducting the investigation, many farmers do not need soil or they are already in the soil. In such a situation, let us know how to take the soil model.
This is the right way to take the soil model
Dig the farmer about 6 inches long, 4 inches wide and 6 inches from a depth of 8 to 10 in 8 to 10 places. Then with the help of a Qurbi, cut from the top to the bottom of the layer with a thickness of about 2.5 cm with the help of a Qurbi. After this, mix the soil collected from different pits in a clean cloth and mix well. Then create a pile of this soil mixture and divide it into four equal parts. After this, make a pile by removing the soil of two parts face -to -face and mixing the remaining two parts well. Repeat this process until about half a kilo of soil remains. Finally, fill this soil in a clean bag and send it to the laboratory.
Keep in mind these things when taking a model
- When you take the soil model, look at the fact that there is no moisture in the field.
- If the soil is moisture, dry it in the shade and send it to the laboratory, so that you can find the right results.
- Keep in mind that when you take the model, there is no wood, irrigation drainage or standing crop around the place where the sample is taken.
Write these things in the farmer model
When sending a soil sample laboratory, farmers should write their name, village name, farm identity (farm number), mother number, development volume and Tehsil. In addition, farmers have to say which crop should be sown in the field, so that the laboratory can provide information about the required amount of fertilizers according to the crop.
Read:-
